Zum Inhalt springen
BlogSpeicherplatzHinzufügen einer weiteren Festplatte zu Ihrer Linode

Hinzufügen einer weiteren Festplatte zu Ihrer Linode

Erstellen Sie ein Datenträgerabbild, formatiert nach ext3 (oder was auch immer)
Go in Ihr Konfigurationsprofil
Suchen Sie ein leeres /dev/ubd*-Gerät - wahrscheinlich /dev/ubdc, wenn Sie bereits ein Root- und ein Swap-Laufwerk haben. Wählen Sie Ihre neue Laufwerksbezeichnung aus dem Dropdown-Menü.
Speichern Sie die Konfiguration
Starten Sie Ihre Linode neu

Innerhalb der Linode können Sie sie nun wie folgt einhängen:

mount /dev/ubd[hier Gerätebuchstabe einfügen] /pfad/zum/mountpoint

/Pfad/zu/Montagepunkt muss ein bestehendes Verzeichnis sein.

-Chris


Kommentare (2)

  1. Author Photo

    A few more commands that might be useful –

    [code][root@nova fs]# df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/hdc6 25G 21G 2.5G 89% /
    /dev/hdc1 15M 3.6M 11M 25% /boot
    /dev/hdd1 19M 3.6M 15M 19% /mnt/hddboot
    /dev/hdd6 18G 17G 57M 100% /mnt/hddroot[/code]

    Also, the mount command by itself will also display the existing mounted file systems…

    [code][root@nova fs]# mount -v
    /dev/hdc6 on / type ext2 (rw)
    none on /proc type proc (rw)
    /dev/hdc1 on /boot type ext2 (rw)
    none on /dev/pts type devpts (rw,gid=5,mode=620)
    /dev/hdd1 on /mnt/hddboot type ext2 (rw)
    /dev/hdd6 on /mnt/hddroot type ext2 (rw)[/code]

    If you take a look at the /proc/swaps file, it’ll tell you what swaps you have:

    [code][root@nova fs]# cat /proc/swaps
    Filename Type Size Used Priority
    /dev/hdc5 partition 136512 0 1
    /dev/hdd5 partition 130500 84100 100[/code]

    -Chris

  2. Author Photo

    Also handy for listing available partitions:

    cat /proc/partitions

Kommentar abgeben

Ihre E-Mail Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit *gekennzeichnet