Email with Postfix, Courier and MySQL on Fedora 13
Updated by Linode
This guide has been deprecated and is no longer being maintained.
The Postfix mail transfer agent (MTA) is a high performance, open source email server system. This guide will help you get Postfix running on your Linux VPS, using Courier for IMAP/POP3 service and MySQL to store information on virtual domains and users.
Secure IMAPS and POP3S services are supported with this configuration, along with support for encrypted SMTP connections. This guide is largely based on Falko Timme’s excellent How To Install courier-imap, courier-authlib, And maildrop On Fedora, RedHat, CentOS guide, with some packages omitted (such as quota support, as this requires rebuilding Postfix and many organizations have no need for quotas). Other steps have been clarified with additional explanations. This guide does not cover SpamAssassin or webmail software installation, although you may reference other resources to add support for these features.
We assume you’ve followed the steps outlined in our getting started guide. All configuration will be performed in a terminal session; make sure you’re logged into your Linode as root via SSH. This tutorial assumes you haven’t already installed the MySQL database server. If you have, you will not be required to follow the initial steps related to MySQL installation.
NOTE: Please carefully read all information presented in this guide. There are many files and commands that will need to be edited as part of the setup process; please do not simply copy and paste the example blocks.
Install Required Packages
Make sure your package repositories and installed programs are up to date by issuing the following command:
Issue the following command to get the required packages installed on your VPS:
1 2 3
yum install rpm-build make libtool openldap-devel cyrus-sasl-devel mysql-devel zlib-devel postgresql-devel \ gdbm-devel pam-devel expect gcc-c++ redhat-rpm-config libtool-ltdl-devel libidn-devel gamin-devel \ pam_mysql cyrus-sasl-sql cyrus-sasl cyrus-sasl-plain postfix mysql-server
This will install the Postfix mail server, the MySQL database server, and several supporting packages needed to build Courier and provide services related to authentication. Once these services are installed you will want to configure them to start on boot, and then start them for the first time by issuing the following commands:
1 2 3 4 5
/sbin/chkconfig --levels 235 mysqld on /sbin/chkconfig --levels 235 saslauthd on service mysqld start service saslauthd start
If you have not already set a MySQL root password you will want to do so now by running:
Make sure you select a strong password comprised of letters, numbers, and non-alphanumeric characters. Write this password down and keep it in a safe place for later reference.
This completes the initial package configuration steps. Next, we’ll build the Courier IMAP server.
Building and Installing Courier
The Courier build process needs to be completed as a non root user. To simplify the number of users created we will build Courier as the user virtual mail user that will store the users mailboxes when the installation is complete. To create the new account run:
groupadd -g 5000 vmail useradd -g vmail -u 5000 vmail -d /home/vmail -m
Once the new user is created you will want to log in to the account by running:
su - vmail
After you have logged in as the mail user you will set up the build environment for Courier by running:
1 2 3 4
mkdir rpmbuild echo "%_topdir /home/vmail/rpmbuild" >> /home/vmail/.rpmmacros mkdir source cd /home/vmail/source/
Next you will need to fetch the source code to build Courier from with:
wget http://downloads.sourceforge.net/project/courier/authlib/0.63.0/courier-authlib-0.63.0.tar.bz2 wget http://downloads.sourceforge.net/project/courier/imap/4.7.0/courier-imap-4.7.0.tar.bz2
You will need to build the Courier authentication library first by running:
rpmbuild -ta courier-authlib-0.63.0.tar.bz2
The building process may take a few minutes. After Courier finishes building, you will need to install the newly built RPM packages. The packages can be found in
/home/vmail/rpmbuild/RPMS/i686/. To install the new packages you will need to switch back to your root session. You can install the packages with the following commands:
1 2 3 4
exit rpm -ivh /home/vmail/rpmbuild/RPMS/i686/courier-authlib-0.63.0-1.fc13.i686.rpm rpm -ivh /home/vmail/rpmbuild/RPMS/i686/courier-authlib-mysql-0.63.0-1.fc13.i686.rpm rpm -ivh /home/vmail/rpmbuild/RPMS/i686/courier-authlib-devel-0.63.0-1.fc13.i686.rpm
Once the packages have in been installed you will want to return to your session as the vmail user. To build the Courier IMAP server you will need to run:
1 2 3
su - vmail cd /home/vmail/source/ rpmbuild -ta courier-imap-4.7.0.tar.bz2
As with building the authentication library for Courier the build process could take a few minutes. The Courier-IMAP package will be placed in
/home/vmail/rpmbuild/RPMS/i686/ with your existing packages. To finish installing Courier you will need to run:
exit rpm -ivh /home/vmail/rpmbuild/RPMS/i686/courier-imap-4.7.0-1.13.i686.rpm
You have now installed of the software needed to server mail from your Linode. Now we will set up MySQL to handle our virtual domains and users.
Set up MySQL for Virtual Domains and Users
Start the MySQL shell by issuing the following command. You’ll be prompted to enter the root password for MySQL that you assigned during the initial setup.
mysql -u root -p
You’ll be presented with an interface similar to the following:
1 2 3 4 5 6 7 8 9 10 11
Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 22 Server version: 5.1.46 Source distribution Copyright (c) 2000, 2010, Oracle and/or its affiliates. All rights reserved. This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to modify and redistribute it under the GPL v2 license Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql>
Issue the following command to create a database for your mail server and switch to it in the shell:
CREATE DATABASE mail; USE mail;
Create a mail administration user called
mail_admin and grant it permissions on the
1 2 3 4 5
GRANT SELECT, INSERT, UPDATE, DELETE ON mail.* TO 'mail_admin'@'localhost' IDENTIFIED BY 'mail_admin_password'; GRANT SELECT, INSERT, UPDATE, DELETE ON mail.* TO 'mail_admin'@'localhost.localdomain' IDENTIFIED BY 'mail_admin_password'; FLUSH PRIVILEGES;
Create the virtual domains table with the following command:
CREATE TABLE domains (domain varchar(50) NOT NULL, PRIMARY KEY (domain) );
Create a table to handle mail forwarding with the following command:
CREATE TABLE forwardings (source varchar(80) NOT NULL, destination TEXT NOT NULL, PRIMARY KEY (source) );
Create the users table with the following command:
CREATE TABLE users (email varchar(80) NOT NULL, password varchar(20) NOT NULL, PRIMARY KEY (email) );
Create a transports table with the following command:
1 2 3 4 5
CREATE TABLE transport ( domain varchar(128) NOT NULL default '', transport varchar(128) NOT NULL default '', UNIQUE KEY domain (domain) );
Exit the MySQL shell by issuing the following command:
Configure to MySQL to bind to 127.0.0.1 by editing the file
/etc/my.cnf. You will need to add the
bind-address = 127.0.0.1 directive to the
[mysqld] block as show below:
[mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Default to using old password format for compatibility with mysql 3.x # clients (those using the mysqlclient10 compatibility package). old_passwords=1 bind-address = 127.0.0.1
This is required for Postfix to be able to communicate with the database server. If you have MySQL set up to run on another IP address (such as an internal IP), you will need to substitute this IP address in place of
127.0.0.1 in later Postfix configuration steps. Please note that it is not advisable to run MySQL on a publicly-accessible IP address.
After you changed MySQL’s configuration, restart the database server with the following command:
service mysqld restart
Next, we’ll perform additional Postfix configuration to set up communication with our database.
Configure Postfix to work with MySQL
Create a virtual domain configuration file for Postfix called
/etc/postfix/mysql-virtual_domains.cf with the following contents. Be sure to replace “mail_admin_password” with the password you chose earlier for the MySQL mail administrator user.
user = mail_admin password = mail_admin_password dbname = mail query = SELECT domain AS virtual FROM domains WHERE domain=’%s’ hosts = 127.0.0.1
Create a virtual forwarding file for Postfix called
/etc/postfix/mysql-virtual_forwardings.cf with the following contents. Be sure to replace “mail_admin_password” with the password you chose earlier for the MySQL mail administrator user.
user = mail_admin password = mail_admin_password dbname = mail query = SELECT destination FROM forwardings WHERE source=’%s’ hosts = 127.0.0.1
Create a virtual mailbox configuration file for Postfix called
/etc/postfix/mysql-virtual_mailboxes.cf with the following contents. Be sure to replace “mail_admin_password” with the password you chose earlier for the MySQL mail administrator user.
user = mail_admin password = mail_admin_password dbname = mail query = SELECT CONCAT(SUBSTRING_INDEX(email,<’@’>,-1),’/’,SUBSTRING_INDEX(email,<’@’>,1),’/’) FROM users WHERE email=’%s’ hosts = 127.0.0.1
Create a virtual email mapping file for Postfix called
/etc/postfix/mysql-virtual_email2email.cf with the following contents. Be sure to replace “mail_admin_password” with the password you chose earlier for the MySQL mail administrator user.
user = mail_admin password = mail_admin_password dbname = mail query = SELECT email FROM users WHERE email=’%s’ hosts = 127.0.0.1
Set proper permissions and ownership for these configuration files by issuing the following commands:
chmod o= /etc/postfix/mysql-virtual_*.cf chgrp postfix /etc/postfix/mysql-virtual_*.cf
Issue the following commands to complete the remaining steps required for Postfix configuration. Please be sure to replace “server.example.com” with the fully qualified domain name you used for your system mail name.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
postconf -e 'myhostname = server.example.com' postconf -e 'mydestination = server.example.com, localhost, localhost.localdomain' postconf -e 'inet_interfaces = all' postconf -e 'mynetworks = 127.0.0.0/8' postconf -e 'message_size_limit = 30720000' postconf -e 'virtual_alias_domains =' postconf -e 'virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, mysql:/etc/postfix/mysql-virtual_email2email.cf' postconf -e 'virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf' postconf -e 'virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf' postconf -e 'virtual_mailbox_base = /home/vmail' postconf -e 'virtual_uid_maps = static:5000' postconf -e 'virtual_gid_maps = static:5000' postconf -e 'smtpd_sasl_auth_enable = yes' postconf -e 'broken_sasl_auth_clients = yes' postconf -e 'smtpd_sasl_authenticated_header = yes' postconf -e 'smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination' postconf -e 'smtpd_use_tls = yes' postconf -e 'smtpd_tls_cert_file = /etc/postfix/smtpd.cert' postconf -e 'smtpd_tls_key_file = /etc/postfix/smtpd.key' postconf -e 'virtual_create_maildirsize = yes' postconf -e 'virtual_maildir_extended = yes' postconf -e 'proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps'
This completes the configuration for Postfix. Next, we’ll make an SSL certificate for the Postfix server that contains values appropriate for your organization.
Create an SSL Certificate for Postfix
Issue the following commands to create the SSL certificate (the
openssl command spans two lines, but should be entered as a single command):
cd /etc/postfix openssl req -new -outform PEM -out smtpd.cert -newkey rsa:2048 -nodes -keyout smtpd.key -keyform PEM -days 365 -x509
You will be asked to enter several values, similar to the output shown below. Be sure to enter the fully qualified domain name you used for the system mail name in place of “server.example.com”.
1 2 3 4 5 6 7
Country Name (2 letter code) [AU]:US State or Province Name (full name) [Some-State]:New Jersey Locality Name (eg, city) :Absecon Organization Name (eg, company) [Internet Widgits Pty Ltd]:MyCompany, LLC Organizational Unit Name (eg, section) :Email Services Common Name (eg, YOUR name) :server.example.com Email Address :email@example.com
Set proper permissions for the key file by issuing the following command:
chmod o= /etc/postfix/smtpd.key
This completes SSL certificate creation for Postfix. Next, we’ll configure
saslauthd to use MySQL for user authentication.
Configure saslauthd to use MySQL
Edit the file
/etc/sysconfig/saslauthd, setting “FLAGS” to “-r” as shown below.
# Directory in which to place saslauthd’s listening socket, pid file, and so # on. This directory must already exist. SOCKETDIR=/var/run/saslauthd
# Mechanism to use when checking passwords. Run “saslauthd -v” to get a list # of which mechanism your installation was compiled with the ability to use. MECH=pam
# Options sent to the saslauthd. If the MECH is other than “pam” uncomment the next line. # DAEMONOPTS=–user saslauth
# Additional flags to pass to saslauthd on the command line. See saslauthd(8) # for the list of accepted flags. FLAGS=”-r”
Next, edit the file
/etc/pam.d/smtp and copy in the following two lines. You will want to comment out the existing configuration options be adding a
# to the beginning of each line. Be sure to change “mail_admin_password” to the password you chose for your mail administration MySQL user earlier.
auth required pam_mysql.so user=mail_admin passwd=mail_admin_password host=127.0.0.1 db=mail table=users usercolumn=email passwdcolumn=password crypt=1 account sufficient pam_mysql.so user=mail_admin passwd=mail_admin_password host=127.0.0.1 db=mail table=users usercolumn=email passwdcolumn=password crypt=1
Next, edit the file
/usr/lib/sasl2/smtpd.conf to match the following example. Be sure to change “mail_admin_password” to the password you chose for your mail administration MySQL user earlier.
pwcheck_method: saslauthd mech_list: plain login allow_plaintext: true auxprop_plugin: mysql sql_hostnames: 127.0.0.1 sql_user: mail_admin sql_passwd: mail_admin_password sql_database: mail sql_select: select password from users where email = ‘%u’
Finally, restart Postfix and
saslauthd by issuing the following commands:
service postfix restart service saslauthd restart
This completes configuration for
saslauthd. Next, we’ll configure Courier to use MySQL for IMAP/POP3 user authentication.
Configure Courier to use MySQL
Edit the file
/etc/authlib/authdaemonrc, changing the “authmodulelist” line to read as follows.
… authmodulelist=”authmysql” …
Back up the current
/etc/authlib/authmysqlrc file and create an empty one as follows:
cp /etc/authlib/authmysqlrc /etc/authlib/authmysqlrc_orig cat /dev/null > /etc/authlib/authmysqlrc
Edit the file
/etc/authlib/authmysqlrc, copying in the following contents. Be sure to change “mail_admin_password” to the password you chose for your mail administration MySQL user earlier.
MYSQL_SERVER localhost MYSQL_USERNAME mail_admin MYSQL_PASSWORD mail_admin_password MYSQL_PORT 0 MYSQL_DATABASE mail MYSQL_USER_TABLE users MYSQL_CRYPT_PWFIELD password MYSQL_UID_FIELD 5000 MYSQL_GID_FIELD 5000 MYSQL_LOGIN_FIELD email MYSQL_HOME_FIELD “/home/vmail” MYSQL_MAILDIR_FIELD CONCAT(SUBSTRING_INDEX(email,<’@’>,-1),’/’,SUBSTRING_INDEX(email,<’@’>,1),’/’)
Edit the files
/usr/lib/courier-imap/etc/pop3d.cnf, replacing the “CN=localhost” lines with the fully qualified domain name you used for your system mailname. You may also wish to edit other lines in these configuration files to set values appropriate for your organization. Courier will automatically generate SSL certificates using the provided information the first time it starts.
Now that Courier has been configured, you can start it by issuing the following commands:
service courier-authlib start service courier-imap start
To configure Courier to start on boot you will need to run:
/sbin/chkconfig --levels 235 courier-authlib on /sbin/chkconfig --levels 235 courier-imap on
You can test your POP3 server to make sure it’s running properly by issuing the following command. You may need to install the
telnet utility first; if so, issue the command
yum install telnet.
telnet localhost pop3
You should see output similar to the following in your terminal:
1 2 3 4
Trying 127.0.0.1... Connected to localhost.localdomain. Escape character is '^]'. +OK Hello there.
Enter the command “quit” to return to your shell. This completes Courier configuration. Next, we’ll make sure aliases are configured properly.
Configure Mail Aliases
Edit the file
/etc/aliases, making sure the “postmaster” and “root” directives are set properly for your organization.
postmaster: root root: firstname.lastname@example.org
After modifying this file, you must run the following commands to update aliases and restart Postfix:
newaliases service postfix restart
This completes alias configuration. Next, we’ll test Postfix to make sure it’s operating properly.
To test Postfix for SMTP-AUTH and TLS, issue the following command:
telnet localhost smtp
While connected to Postfix, issue the following command:
You should see output similar to the following, with the line “250-STARTTLS” included:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
archimedes:/etc/courier# telnet localhost 25 Trying 127.0.0.1... Connected to localhost.localdomain. Escape character is '^]'. 220 archimedes.example.com ESMTP Postfix ehlo localhost 250-archimedes.example.com 250-PIPELINING 250-SIZE 30720000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH CRAM-MD5 NTLM PLAIN LOGIN DIGEST-MD5 250-AUTH=CRAM-MD5 NTLM PLAIN LOGIN DIGEST-MD5 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN
Issue the command
quit to terminate the Postfix connection. Next, we’ll populate the MySQL database with domains and email users.
Setting up Domains and Users
Please note that you’ll need to modify the DNS records for any domains for which you wish to handle email by adding an MX record that points to your mail server’s fully qualified domain name. If MX records already exist for a domain you would like to handle the email for, you’ll need to either delete them or set them to a larger priority number than your mail server. Smaller priority numbers indicate higher priority for mail delivery, with “0” being the highest priority.
We’ll use the MySQL shell to add support for the domain “example.com”, which will have an email account called “sales”. You should substitute one of your domains for “example.com” in these statements, along with a strong password for the “password” entry in the second SQL statement.
1 2 3 4 5
mysql -u root -p USE mail; INSERT INTO domains (domain) VALUES ('example.com'); INSERT INTO users (email, password) VALUES ('email@example.com', ENCRYPT('password'));
You’ll need to send a welcome message to new email accounts before they can be accessed via IMAP or POP3. This is because the mailboxes for new users won’t be created until an email is received for them. To send a welcome message from the command line, you may use the
mailx utility. Issue the following commands to install it and send the message.
yum install mailx mailx firstname.lastname@example.org
Ctrl+D to complete the message. This completes the configuration for a new domain and email user.
Congratulations, you’ve successfully configured Postfix, Courier, and MySQL to provide email services for virtual domains and users on your Linux VPS. When configuring your local email client, use the full email address for the mailbox you wish to connect to as the username. Please consult the “More Information” section for additional resources that may prove useful in the administration of your new email server.
You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.
- How To Install courier-imap, courier-authlib, And maildrop On Fedora, RedHat, CentOS
- Postfix MySQL Howto
- Postfix SASL Howto
- Courier imapd Documentation
- Courier pop3d Documentation
- MySQL Documentation
This guide is published under a CC BY-ND 4.0 license.