How to Deploy Plex Media Server with Marketplace Apps
Traducciones al EspañolEstamos traduciendo nuestros guías y tutoriales al Español. Es posible que usted esté viendo una traducción generada automáticamente. Estamos trabajando con traductores profesionales para verificar las traducciones de nuestro sitio web. Este proyecto es un trabajo en curso.
Plex Marketplace App
Plex is a feature-rich streaming platform that allows you to organize and stream your own digital video and audio to your devices. This guide shows you how to deploy the Plex Media Server using Linode’s Plex Marketplace App, upload media to your Plex Server, and connect to it from a Plex client application. Your Plex Media Server could benefit from large amounts of disk space, so consider using our Block Storage service with this app.
Why Use Plex Media Server
Owning a Plex Media Server enables you to maintain a personal media library in addition to accessing Plex’s own content, all available to stream to nearly any device. The ability to stream your own media is a unique advantage over other streaming services like Netflix, and comes only at the cost of your Linode services. Additional features, including local downloading, bandwidth limiting, and hardware transcoding are also available through the paid Plex Pass service.
Deploy a Plex Marketplace App
Linode’s App Marketplace allows you to easily deploy software on a Linode using the Linode Cloud Manager. To access Linode’s App Marketplace:
Log in to your Linode Cloud Manager account.
From the Linode dashboard, click on the Marketplace button in the left-hand navigation menu.
The Linode creation page appears, with the Marketplace tab pre-selected.
Under the Select App section, select the app you would like to deploy:
Once you have selected the app, proceed to the app’s Options section and provide values for the required fields.
Plex Marketplace App Options
The following configuration options create a secure Limited User to run your Plex Media Server.
|Limited User Name||The
username for SSH access to your Linode. Required.|
If the username
|Limited User Password||The user password for SSH access to your Linode. Required.|
|Limited User SSH Key||The user public SSH key for SSH access to your Linode. Optional.|
You can find instructions on generating an SSH key pair in our guide on Using Public Key Authentication with SSH. For an additional layer of security, you can require SSH key access by disabling password authentication.
The following configuration options are possible for your Linode server:
|Select an Image||Debian 10 is currently the only image supported by the Plex Marketplace App. Required.|
|Region||The region where you would like your Linode to reside. In general, it’s best to choose a location that’s closest to you. For more information on choosing a data center, review the How to Choose a Data Center guide. You can also generate MTR reports for a deeper look at the network routes between you and each of our data centers. Required.|
|Linode Plan||Your Linode’s hardware resources. Plex recommends 2GB of RAM to run Plex Media Server on its own, and more if you plan to run additional applications. If you decide that you need more or fewer hardware resources after you deploy your app, you can always resize your Linode to a different plan. Required.|
|Linode Label||The name for your Linode, which must be unique between all of the Linodes on your account. This name is how you identify your server in the Cloud Manager’s Dashboard. Required.|
|Root Password||The primary administrative password for your Linode instance. This password must be provided when you access the root user. The password must meet complexity strength validation requirements for a strong password. Your root password can be used to perform any action on your server, so make it long, complex, and unique. Required.|
When you have provided all required Linode Options, select on the Create button. Your Plex app will complete installation anywhere between 1-5 minutes after your Linode has finished provisioning.
The Plex Marketplace App installs the following required software on your Linode:
|Docker Engine||Docker Engine is an open source containerization technology for building and containerizing your applications. This Marketplace App deploys Plex Media Server as a Docker container.|
|Plex Media Server||The Plex Media Server transmits locally-stored media files, enabling you to stream your personal media collection to any device that can support a Plex Client.|
NoteCurrently, Linode does not manage software and systems updates for Marketplace Apps. It is up to the user to perform routine maintenance on software deployed in this fashion.
Getting Started After Deployment
After your Plex Server has been deployed, you can upload media and configure access to your Plex Server from Plex clients for your media devices.
Before you begin, ensure that you have signed up for a Plex account.
Administration of your Plex Server is performed from its web interface. Before you can connect to the web interface from your workstation, you first need to create an SSH tunnel to your Linode.
This guide occasionally directs you to substitute variables beginning with
$in certain commands.
An easy way to make these substitutions is to set the variables in your shell, then simply copy the commands as they are provided in this guide — your shell automatically substitutes the
$variables in those commands with the values you have set.
For example, you can set configure a substitution for
Your shell then interprets
$IP_ADDRESSas the value you have provided in following commands, for example:
ssh [email protected]$IP_ADDRESS -L 8888:localhost:32400
You now have an established SSH connection to your Plex Server Linode in your terminal, and can also access the Plex web interface from your workstation browser.
http://localhost:8888/webinto your workstation browser to access the Plex Server setup web interface. Enter your Plex account username and password to proceed with the setup process.
Give your Plex Server a name. Be sure to leave the Allow me to access my media outside my home box checked, and select NEXT.
Finish initial setup and reach the Plex home screen by selecting DONE.
Click on the Settings icon in top-right corner of the Plex web interface.
On the left side bar, ensure that your new Plex Server is selected and select on Remote Access under the Settings section.
Click the check box next to Manually specify public port, keep the default value of
32400, and select RETRY or APPLY. You may need to select SHOW ADVANCED to see these settings.
Wait until you see a message stating that your Plex Server is Fully accessible outside your network.
You can now access uploaded media and manage your Plex Server from any Plex Client, such as the Plex Web App. If you are unable to reach your Plex Server remotely, you can repeat the steps in this section to re-establish a direct connection for administrative purposes.
(Optional) Connect a Linode Block Storage Volume
If your media collection is larger than the space available from your Linode plan, Block Storage is a convenient solution. This section outlines the steps for creating and connecting a Block Storage Volume for use with your Plex Server.
NoteFor future reference, you can find examples of the instructions provided in this section in Cloud Manager by navigating to Volumes, then selecting Show Configuration from the option menu for your Volume.
Create a Block Storage Volume if you do not already have one prepared.
Establish an SSH connection to your Plex Server Linode as your Limited User.
On your Plex Server Linode, create a directory to your Volume’s mountpoint:
Mount your Volume path to the mountpoint you have created, substituting
$FILE_SYSTEM_PATHwith your Volume’s file system path (which is viewable from the Cloud Manager Volumes dashboard):
sudo mount $FILE_SYSTEM_PATH ~/plex/media/linode-volume
Check available disk space:
Filesystem 1G-blocks Used Available Use% Mounted on udev 1G 0G 1G 0% /dev tmpfs 1G 1G 1G 11% /run /dev/sda 49G 3G 45G 5% / tmpfs 1G 0G 1G 0% /dev/shm tmpfs 1G 0G 1G 0% /run/lock tmpfs 1G 0G 1G 0% /sys/fs/cgroup tmpfs 1G 0G 1G 0% /run/user/1000 /dev/sdc 20G 1G 19G 1% /home/username/plex/media/linode-volume
Notice that there is some overhead with the Volume due to the file system.
To ensure that your Volume automatically mounts every time your Linode reboots, run the following command to modify your
$FILE_SYSTEM_PATHwith your Volume’s file system path (the
$HOMEenvironment variable should already be set as your user’s home directory):
echo "$FILE_SYSTEM_PATH $HOME/plex/media/linode-volume ext4 defaults,noatime,nofail 0 2" | \ sudo tee -a /etc/fstab
Restart your Plex Server Docker container:
docker restart plex
Media on your Volume is now accessible through the Plex web interface at the mounted directory on your Linode. Next, follow the instructions below on how to Upload Media to your Volume (use your Volume’s mountpoint instead of creating a new subdirectory), and Add Media Libraries to enable streaming media stored on your Volume.
Your Plex Server is set up to access media files in the
~/plex/media directory. You have many options for uploading or downloading media to your Plex Server. This section shows you how to organize and upload files to your Plex Server using the
On your Plex Server Linode, create a subdirectory within
~/plex/mediato store your media files. Plex recommends organizing media by type, so pick a subdirectory name that matches the type of media you plan to upload. For example, to create a directory to store movie files, enter the following command:
From your media workstation, use the
scpcommand to move media to your Plex Server’s media subdirectory, substituting
$USERNAMEwith your Linux Limited User Name, and
$IP_ADDRESSwith the IP address of your Plex Server Linode:
scp example_video.mp4 [email protected]$IP_ADDRESS:~/plex/media/movies
Depending on the file size(s), this may take a few minutes.
NoteThere are other ways to upload files to your Plex Server Linode. See our section in Linux System Administration Basics for more information.
Add Media Libraries
Log into a Plex Client, such as the Plex Web App, then select the MORE > link on the Plex side bar.
Hover over your Plex Server’s name in the Plex side bar, then select the + icon.
Select your library type, set the name for your media library, select your language, then select the NEXT button.
Click BROWSE FOR MEDIA FOLDER, navigate to the directory within
/mediawhere your files are stored, then select the ADD button.
Once you are satisfied with your selection, select the ADD LIBRARY button.
Pin your new media library to make it accessible from the Plex home screen.
Repeat the steps in this section to add additional media folders.
You now have all the tools you need to create an online media library and stream it to any device with Plex.
You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.
This page was originally published on