Email and Calendars with Zimbra 6 on Debian 6 (Squeeze)
Traducciones al EspañolEstamos traduciendo nuestros guías y tutoriales al Español. Es posible que usted esté viendo una traducción generada automáticamente. Estamos trabajando con traductores profesionales para verificar las traducciones de nuestro sitio web. Este proyecto es un trabajo en curso.
This guide has been deprecated and is no longer being maintained.
Zimbra is a groupware system that provides email, calendaring, integrated antivirus and spam filtering, and more for multiple domains. Available in several editions, this guide will help you get Zimbra Collaboration Suite - Open Source Edition installed on your Debian 6 (Squeeze) Linode.
Please note that Zimbra is a fairly “heavy” (resource-intensive) product compared to some other groupware offerings. We recommend a Linode 2048 or higher for best results; you may encounter issues using Zimbra with plans with less resources. Additionally, note that Zimbra works best as a standalone product on your Linode; installation alongside other software is not advised. Zimbra is deprecating support for 32-bit systems, and therefore it is assumed you have deployed the 64-bit version of Debian 6. If this is not the case, you will want to redeploy with the 64-bit version before continuing. All configuration will be performed through the terminal; please make sure you’re logged into your Linode as root via SSH.
Please note that as of this writing, Zimbra is not officially supported on Debian 6. The software should function as expected, but your support options may be limited by choosing to install it on Debian 6. If this is a concern for you, you may wish to consider following our Debian 5 (Lenny) Zimbra guide instead.
Basic System Configuration
Issue the following commands to set your system hostname, substituting a unique value for “hostname.” :
echo "hostname" > /etc/hostname hostname -F /etc/hostname
/etc/hosts file to resemble the following, substituting your Linode’s public IP address for 22.214.171.124, your hostname for “hostname,” and your primary domain name for “example.com.” :
- File: /etc/hosts
127.0.0.1 localhost.localdomain localhost 126.96.36.199 hostname.example.com hostname
Before proceeding with the rest of this guide, you should create a DNS entry for your system’s FQDN (fully qualified domain name). This means you’ll need to make sure “hostname.example.com” (substituting your FQDN) points to your Linode’s IP address. Additionally, you should create or edit the MX record for your domain to use your FQDN as the host that handles your email. For more information on this topic, please refer to our guides on DNS basics and the Linode DNS Manager.
Install Prerequisite Packages
Make sure your package repositories and installed programs are up to date by issuing the following commands:
apt-get update apt-get upgrade --show-upgraded
Issue the following commands to install several packages required by Zimbra:
apt-get install sudo libpcre3 libgmp3c2 lib32gmp3-dev libgmp3-dev sysstat libexpat1 libidn11 perl-modules wget lzma
Depending on the requirements for the current version of Zimbra, you may need to install additional packages later. The install program will notify you if additional packages are required.
Visit the download page for
Zimbra Open Source Edition and copy the link to the current version of the software for Debian 5 (Lenny) to your clipboard (unless there is a new link for Debian 6, in which case you should use that instead). Issue the following commands on your Linode via the shell to download and unpack the install package, replacing the filenames shown below after
tar with the current version. Please note that the version you download (32 or 64-bit) must match your Linode’s architecture.
wget http://files2.zimbra.com/downloads/6.0.10_GA/zcs-6.0.10_GA_2692.DEBIAN5.20101215161423.tgz tar -xzvf zcs* cd zcs*
Edit the file
util/utilfunc.sh. Search for the first instance of the following line:
- File: util/utilfunc.sh
PREREQ_PACKAGES="sudo libidn11 libgmp3 libstdc++6"
Change it to match the following excerpt:
- File: util/utilfunc.sh
PREREQ_PACKAGES="sudo libidn11 libgmp3c2 libstdc++6"
Due to stricter behavior in the version supplied in Debian 6, you’ll need to temporarily downgrade your
dpkg binary before proceeding. Issue one of the following commands, depending on whether your running 32-bit or 64-bit Debian:
wget http://security.ubuntu.com/ubuntu/pool/main/d/dpkg/dpkg_188.8.131.52ubuntu4.5_amd64.deb wget http://security.ubuntu.com/ubuntu/pool/main/d/dpkg/dpkg_184.108.40.206ubuntu4.5_i386.deb
Install the package with the following command:
dpkg -i dpkg*deb
Launch the installer with the following command:
The install will begin, prompting you to respond to a number of questions, and consuming a moment to perform various tasks. You can safely assume the default configuration. The system will offer the following prompt:
The system will be modified. Continue? [N] Y
As noted, answer
Y to continue with the installation. The installation will take a few moments to install of the system packages.
After the installation completes, you may receive a warning similar to the one shown below:
DNS ERROR resolving MX for hostname.example.com It is suggested that the domain name have an MX record configured in DNS Change domain name? [Yes] No
You’ll then be presented with an admin menu next.
Main menu 1) Common Configuration: 2) zimbra-ldap: Enabled 3) zimbra-store: Enabled +Create Admin User: yes +Admin user to create: [email protected] ******* +Admin Password UNSET +Enable automated spam training: yes +Spam training user: [email protected] +Non-spam(Ham) training user: [email protected] +Global Documents Account: [email protected] +SMTP host: hostname.example.com +Web server HTTP port: 80 +Web server HTTPS port: 443 +Web server mode: http +IMAP server port: 143 +IMAP server SSL port: 993 +POP server port: 110 +POP server SSL port: 995 +Use spell check server: yes +Spell server URL: http://hostname.example.com:7780/aspell.php +Configure for use with mail proxy: FALSE +Configure for use with web proxy: FALSE +Enable version update checks: TRUE +Enable version update notifications: TRUE +Version update notification email: [email protected] +Version update source email: [email protected] 4) zimbra-mta: Enabled 5) zimbra-snmp: Enabled 6) zimbra-logger: Enabled 7) zimbra-spell: Enabled 8) Default Class of Service Configuration: r) Start servers after configuration yes s) Save config to file x) Expand menu q) Quit Address unconfigured (**) items (? - help)
Enter “3” to enter the zimbra-store menu, which will look similar to the following:
Store configuration 1) Status: Enabled 2) Create Admin User: yes 3) Admin user to create: [email protected] ** 4) Admin Password UNSET 5) Enable automated spam training: yes 6) Spam training user: [email protected] 7) Non-spam(Ham) training user: [email protected] 8) Global Documents Account: [email protected] 9) SMTP host: hostname.example.com 10) Web server HTTP port: 80 11) Web server HTTPS port: 443 12) Web server mode: http 13) IMAP server port: 143 14) IMAP server SSL port: 993 15) POP server port: 110 16) POP server SSL port: 995 17) Use spell check server: yes 18) Spell server URL: http://hostname.example.com:7780/aspell.php 19) Configure for use with mail proxy: FALSE 20) Configure for use with web proxy: FALSE 21) Enable version update checks: TRUE 22) Enable version update notifications: TRUE 23) Version update notification email: [email protected] 24) Version update source email: [email protected] Select, or 'r' for previous menu [r] 4
You can configure various options here; but, the most important option is the one for setting the administrator password. Enter “4” to set it, choosing a strong password comprised of letters, numbers, and non-alphanumeric characters. After setting the admin password, enter “r” to return to the main menu. At this point you can enter “a” to apply the configuration that you have set, and follow this procedure. This allows Zimbra to proceed with the remaining installation steps.
Issue the following command to restore your original version of
apt-get install dpkg
After installation has completed, you may wish to reboot your Linode to make sure everything comes back up properly. After doing so, visit the Zimbra admin URL in your browser. It will be in the form
https://hostname.example.com:7071/. You’ll need to accept the SSL certificate presented to access the admin panel, which you may then use to continue configuring your new Zimbra server.
Once you have configured the server and added accounts, users may log in using a link similar to
Monitor for Software Updates and Security Notices
When running software compiled or installed directly from sources provided by upstream developers, you are responsible for monitoring updates, bug fixes, and security issues. After becoming aware of releases and potential issues, update your software to resolve flaws and prevent possible system compromise. Monitoring releases and maintaining up to date versions of all software is crucial for the security and integrity of a system.
Please monitor the Zimbra Updates page to ensure that you are aware of all updates to the software and can upgrade appropriately or apply patches and recompile as needed.
When upstream sources offer new releases, repeat the instructions for installing Zimbra and recompile your software when needed. These practices are crucial for the ongoing security and functioning of your system.
You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.
This page was originally published on