Monitor Services with Nagios on Debian 5 (Lenny)

Select distribution:
Traducciones al Español
Estamos traduciendo nuestros guías y tutoriales al Español. Es posible que usted esté viendo una traducción generada automáticamente. Estamos trabajando con traductores profesionales para verificar las traducciones de nuestro sitio web. Este proyecto es un trabajo en curso.
Deprecated

This guide has been deprecated and is no longer being maintained.

Nagios is an open source monitoring tool that monitors services within a server cluster. In addition to monitoring services such as SMTP/POP3 and HTTP, Nagios can also be used to check the health of the server itself.

Before continuing with this guide, you will need to make sure that you have set your hostname by following the steps outlined in the Setting Up and Securing a Compute Instance. Additionally, you will also need to have a functioning LAMP stack in order to use Nagios.

Prepare for Nagios Installation

Issue the following commands to update your system’s package repositories and installed packages as well as install dependencies for Nagios:

apt-get update
apt-get upgrade
apt-get install build-essential php5-gd wget libgd2-xpm libgd2-xpm-dev

You will also need to create a new system user account to run Nagios under. Issue the following commands to create the nagios user and nagcmd group:

adduser --system --no-create-home --disabled-login --group nagios
groupadd nagcmd
usermod -G nagcmd nagios
usermod -a -G nagcmd www-data

Install Nagios

Download Nagios Software

Begin by downloading the latest version of the Nagios Core package. At the time of writing the latest version of Nagios is 3.2.3, but be sure that you are downloading the latest version by checking the Nagios download page. Issue the following commands:

cd /opt/
wget http://prdownloads.sourceforge.net/sourceforge/nagios/nagios-3.2.3.tar.gz

Next, download the official plugin package for Nagios. At the time of writing this is version 1.4.15, but check the Nagios plugin download page to verify.:

cd /opt/
wget http://prdownloads.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.15.tar.gz

Build and Install Nagios Core

Issue the following commands to extract, compile, and install the Nagios Core:

tar -xzvf /opt/nagios-3.2.3.tar.gz
cd /opt/nagios-3.2.3
./configure --with-command-group=nagcmd
make all
make install
make install-init
make install-config
make install-commandmode

Configure Nagios Core

Begin by editing the /usr/local/nagios/etc/objects/contacts.cfg file’s email field according to the example below:

File: /usr/local/nagios/etc/objects/contacts.cfg
1
2
3
4
5
6
define contact{
    contact_name nagiosadmin ; Short name of user use generic-contact
    ; Inherit default values from generic-contact template (defined above)
    alias John Doe ; Full name of user
    email <someadmin@example.com> ; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ******
}

Issue the following commands to configure the web interface for Nagios:

cd /opt/nagios-3.2.3
make install-webconf

You will now need to create a password for the nagiosadmin user. You will use this password to log into the Nagios administration panel when it is configured.

htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin

In order for your configuration changes to be applied, you will need to reload the web server.:

/etc/init.d/apache2 reload

Build and install Nagios Plugins

To install and configure the Nagios plugins, issue the following commands:

cd /opt/
tar xzf /opt/nagios-plugins-1.4.15.tar.gz
cd /opt/nagios-plugins-1.4.15
./configure --with-nagios-user=nagios --with-nagios-group=nagios
make
make install

You’re now ready to run Nagios for the first time and continue with the configuration process!

Running Nagios

Issue the following commands to ensure that Nagios is started when your system boots:

chmod +x /etc/init.d/nagios
/usr/sbin/update-rc.d -f nagios defaults

Run the following command to check your Nagios configuration file for errors:

/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg

Any errors will be shown in red. If everything is okay, you may issue the following command to start Nagios for the first time:

/etc/init.d/nagios start

You may now access the web based administration and reporting tools by visiting http://example.com/nagios/, where example.com refers to your Linode’s default virtual host. You may also access this interface by visiting http://12.34.56.78/nagios/ where 12.34.56.78 is the IP address of your Linode. You will need to authenticate with the nagiosadmin user you created earlier.

Please note: The above example does not use SSL and your password will be sent unencrypted. You will need to generate an SSL certificate and install it yourself. Steps for doing so can be found in our SSL guide.

Configure Nagios Alerts

A great deal of the power of Nagios is its ability to send notifications and alerts regarding the status of services and devices. While most of this fine-grained configuration is beyond the scope of this document, we have outlined some basic notifications below.

Installing Prerequisites to send Mail Alerts

Before Nagios can send alerts by email, basic mail services need to be installed. Issue the following command:

apt-get install mailutils postfix

When the installation process prompts you to define the type of mail setup you’re running, select “Internet Site”. You will also want to specify the machine specific hostname for this server during the installation process. Next, you’ll need to update the path to the mail binary in the Nagios command file. Change both references from /bin/mail to /usr/bin/mail. The relevant section of this file should look like this:

File: /usr/local/nagios/etc/objects/commands.cfg
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
define command{
    command_name    notify-host-by-email
    command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$
}

# 'notify-service-by-email' command definition
define command{
    command_name    notify-service-by-email
    command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$" | /usr/bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$
}

In order for these changes to take effect, you will need to restart Nagios:

/etc/init.d/nagios restart

Configuring Basic IRC Notifications

You can also configure Nagios to send notifications to an IRC channel through a bot. Issue the following commands to download, extract, and build the IRC bot:

cd /opt/
wget http://www.vanheusden.com/nagircbot/nagircbot-0.0.29b.tgz
tar -zxvf /opt/nagircbot-0.0.29b.tgz
cd /opt/nagircbot-0.0.29b
make
make install

You will need to provide a few parameters to the IRC bot such as its nickname and server in order to use it. For a list of parameters, issue the following command:

nagircbot -h

To start the Nagios IRC bot, issue the nagircbot command. See the following example as a starting point. Replace irc.example.net with the address of your IRC network, and #example with the name of the IRC channel that the bot should send notifications to. Replace nagircbot with the desired nickname for your bot, and ident and realname with the ident and real name that the IRC bot should use.

nagircbot -f /usr/local/nagios/var/status.dat -s irc.example.net:6667 -c \#example -C -n nagircbot -u ident -U realname -I 900

In this example, “-f /usr/local/nagios/var/status.dat” tells the bot where to get status updates. The “-C” flag will allow the bot to send colored messages to the channel depending on the status of the service. When services are down, red status messages are displayed. These messages turn green when the service has recovered. Warnings are displayed in yellow, but do not typically represent a critical issue. The “-I 900” parameter tells the bot to send a status message to the channel every 900 seconds (or 15 minutes). For example, the bot may send something like “Critical: 0, warning: 1, ok: 6, up: 2, down: 0, unreachable: 0, pending: 0”, which indicates that there are no critical messages and 1 warning.

Nagios contains numerous features that are beyond the scope of this document. You are encouraged to explore the resources listed below and the administrative interface for more information regarding the setup and configuration of Nagios.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

This page was originally published on


Your Feedback Is Important

Let us know if this guide was helpful to you.


Join the conversation.
Read other comments or post your own below. Comments must be respectful, constructive, and relevant to the topic of the guide. Do not post external links or advertisements. Before posting, consider if your comment would be better addressed by contacting our Support team or asking on our Community Site.
The Disqus commenting system for Linode Docs requires the acceptance of Functional Cookies, which allow us to analyze site usage so we can measure and improve performance. To view and create comments for this article, please update your Cookie Preferences on this website and refresh this web page. Please note: You must have JavaScript enabled in your browser.