Nginx and Perl-FastCGI on Fedora 13

Select distribution:
Traducciones al Español
Estamos traduciendo nuestros guías y tutoriales al Español. Es posible que usted esté viendo una traducción generada automáticamente. Estamos trabajando con traductores profesionales para verificar las traducciones de nuestro sitio web. Este proyecto es un trabajo en curso.
Deprecated

This guide has been deprecated and is no longer being maintained.

Create a Linode account to try this guide with a $ credit.
This credit will be applied to any valid services used during your first  days.

The nginx web server is a fast, lightweight server designed to efficiently handle the needs of both low and high traffic websites. Although commonly used to serve static content, it’s quite capable of handling dynamic pages as well. This guide will help you get nginx up and running with Perl and FastCGI on your Fedora 13 Linode.

It is assumed that you’ve already followed the steps outlined in our Setting Up and Securing a Compute Instance. These steps should be performed via a root login to your Linode over SSH.

Basic System Configuration

Issue the following commands to set your system hostname, substituting a unique value for “hostname.” :

echo "HOSTNAME=hostname" >> /etc/sysconfig/network
hostname "hostname"

Edit your /etc/hosts file to resemble the following, substituting your Linode’s public IP address for 12.34.56.78, your hostname for “hostname,” and your primary domain name for “example.com.” :

File: /etc/hosts
1
2
127.0.0.1 localhost.localdomain localhost
12.34.56.78 hostname.example.com hostname

Install Required Packages

Issue the following commands to update your system and install the nginx web server and compiler tools (Perl should already be installed):

yum update
yum install nginx make automake gcc gcc-c++ wget fcgi-perl
chkconfig --add nginx
chkconfig --level 35 nginx on
service nginx start

Configure Your Site

In this guide, we’ll be using the domain “example.com” as our example site. You should substitute your own domain name in the configuration steps that follow. First, we’ll need to create directories to hold our content and log files:

mkdir -p /srv/www/www.example.com/public_html
mkdir /srv/www/www.example.com/logs
chown -R nginx:nginx /srv/www/www.example.com

Issue the following commands to create virtual hosting directories:

mkdir /etc/nginx/sites-available
mkdir /etc/nginx/sites-enabled

Add the following lines to your /etc/nginx/nginx.conf file, immediately after the line for include /etc/nginx/conf.d/*.conf:

File: /etc/nginx/nginx.conf
1
2
# Load virtual host configuration files.
include /etc/nginx/sites-enabled/*;

Next, we’ll need to define our site’s virtual host file:

File: /etc/nginx/sites-available/www.example.com
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
server {
    listen   80;
    server_name www.example.com example.com;
    access_log /srv/www/www.example.com/logs/access.log;
    error_log /srv/www/www.example.com/logs/error.log;
    root /srv/www/www.example.com/public_html;

    location / {
        index  index.html index.htm;
    }

    location ~ \.pl$ {
        gzip off;
        include /etc/nginx/fastcgi_params;
        fastcgi_pass  127.0.0.1:8999;
        fastcgi_index index.pl;
        fastcgi_param  SCRIPT_FILENAME  /srv/www/www.example.com/public_html$fastcgi_script_name;
    }
}

Issue the following commands to enable the site:

cd /etc/nginx/sites-enabled/
ln -s /etc/nginx/sites-available/www.example.com
service nginx restart

You may wish to create a test HTML page under /srv/www/www.example.com/public_html/ and view it in your browser to verify that nginx is properly serving your site (Perl will not work yet). Please note that this will require an entry in DNS pointing your domain name to your Linode’s IP address (found on the “Remote Access” tab in the Linode Manager).

Configure FastCGI Wrapper

Issue the following command sequence to download the FastCGI wrapper script (credit: Denis S. Filimonov) and an init script to control the FastCGI process, set the permissions, launch the wrapper for the first time, and ensure that FastCGI launches at startup:

cd /opt/
wget -O fastcgi-wrapper http://www.linode.com/docs/assets/640-fastcgi-wrapper.sh
wget -O init-rpm.sh http://www.linode.com/docs/assets/639-init-rpm.sh
mv /opt/fastcgi-wrapper /usr/bin/fastcgi-wrapper.pl
mv /opt/init-rpm.sh /etc/rc.d/init.d/perl-fastcgi
chmod +x /usr/bin/fastcgi-wrapper.pl
chmod +x /etc/rc.d/init.d/perl-fastcgi
/etc/rc.d/init.d/perl-fastcgi start
chkconfig --add perl-fastcgi
chkconfig perl-fastcgi on

Test Perl with FastCGI

Create a file called “test.pl” in your site’s “public_html” directory with the following contents:

File: /srv/www/www.example.com/public\\_html/test.pl
 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
#!/usr/bin/perl

print "Content-type:text/html\n\n";
print <<EndOfHTML;
<html><head><title>Perl Environment Variables</title></head>
<body>
<h1>Perl Environment Variables</h1>
EndOfHTML

foreach $key (sort(keys %ENV)) {
    print "$key = $ENV{$key}<br>\n";
}

print "</body></html>";

Make the script executable by issuing the following command:

chmod a+x /srv/www/www.example.com/public_html/test.pl

When you visit http://www.example.com/test.pl in your browser, your Perl environment variables should be shown. Congratulations, you’ve configured the nginx web server to use Perl with FastCGI for dynamic content!

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

This page was originally published on


Your Feedback Is Important

Let us know if this guide was helpful to you.


Join the conversation.
Read other comments or post your own below. Comments must be respectful, constructive, and relevant to the topic of the guide. Do not post external links or advertisements. Before posting, consider if your comment would be better addressed by contacting our Support team or asking on our Community Site.
The Disqus commenting system for Linode Docs requires the acceptance of Functional Cookies, which allow us to analyze site usage so we can measure and improve performance. To view and create comments for this article, please update your Cookie Preferences on this website and refresh this web page. Please note: You must have JavaScript enabled in your browser.