Traducciones al Español
Estamos traduciendo nuestros guías y tutoriales al Español. Es posible que usted esté viendo una traducción generada automáticamente. Estamos trabajando con traductores profesionales para verificar las traducciones de nuestro sitio web. Este proyecto es un trabajo en curso.
Create a Linode account to try this guide with a $ credit.
This credit will be applied to any valid services used during your first  days.

Irssi is a terminal-based chat client for real-time conversations over Internet Relay Chat (IRC). IRC is the common meeting ground for Linode users to exchange knowledge and troubleshoot issues in our public channel, #linode on OFTC.

Irssi can run on Linux or MAC OS X, either from your local workstation or your Linode. If you are unfamiliar with using a Linux terminal, you may want to review the Linode guides Using the Terminal and Introduction to Linux Concepts. Additionally, it is assumed that you have followed our Setting Up and Securing a Compute Instance if you intend to run Irssi on your Linode.


Complete these tasks before you start:

  • Follow our Setting Up and Securing a Compute Instance guide to update your system. You may also wish to set the timezone, configure your hostname, create a limited user account, and harden SSH access.
  • Make sure GNU Screen is installed. It should be by default. See our Screen Guide for information.

Installing Irssi

To install Irssi, issue the command for the appropriate system:

Debian or Ubuntu:

apt-get install irssi

CentOS or Fedora:

yum install irssi


pacman -S irssi

Mac OS X with MacPorts:

port install irssi

Mac OS X with HomeBrew; check for new Brew formulas before you install Irssi. The following commands will update Brew and install Irssi:

brew update
brew install irssi

Starting Irssi

To start Irssi, follow the steps below.

  1. Start a new Screen session called chat so Irssi will keep running when you close your terminal session:

    screen -S chat
  2. Start Irssi:


    You should see the Irssi startup screen on the default chat interface:

    Irssi’s default message.

To rejoin Irssi later, just rejoin your Screen session.

Configuring Irssi

Now you can start configuring Irssi to use your preferred networks, join channels, and set your nick (nickname). These examples will show you how to connect to the Linode IRC channel, #linode.

Joining IRC Networks

The Linode channel is hosted on the OFTC network. An IRC network is made up one or more connected IRC servers with the same channels and people. Linode’s channel is on Join the OFTC network with the following command, from within Irssi:


To disconnect from a channel, run:

You can join additional networks by replacing with a different network.

Joining Channels

A channel is a chatroom. Linode’s channel is called #linode. Use the following command to join:

/join #linode

Once you’ve joined the channel, you can start typing messages to everyone in the channel.

To join a channel that has a password, use this command, replacing #channel with the channel name, and password with the channel password:

/join #channel password

To leave or part an IRC window use the following command:

/part #linode

Configuring Default Nickname (Nick)

To set your default nick use the command, replacing user with your desired nickname:

/set nick user

If the nickname (or nick) is already being used on the servers you’re connected to, Irssi will alert you.

Managing IRC Nicknames

Changing your IRC nickname is easy with the /nick command. Replace user with your new nickname:

/nick user

If the nickname (or nick) is already being used on the servers you’re connected to, Irssi will alert you.

When you change nicknames, every channel that you are joined to will receive (and display) a message alerting the participants of those channels that you have changed nicks.

If you want to gather more information about an IRC user, use the command below:

/whois new_user

Sample output of the whois command:

11:45 -!-  new_user []
11:45 -!-  ircname  : Cecil Sharp
11:45 -!-  channels : #linode
11:45 -!-  server   : [Galloway, NJ, US]
11:45 -!-           : user has identified to services

The information provided via this command includes the ircname, channels, and name of the user.

Sending Messages

To send a private message to just one person on your network, use the /msg command. You should replace friendnick with the other user’s nick, and Hello there! with your message:

/msg friendnick Hello there!
Please note that if you are in a channel, you can use tab to autocomplete nicks within that channel.

Messages are not encrypted and should not be considered secure communications. Also, there is no spellcheck feature in Irssi.

Basic Window Navigation

Every channel and private message has its own numbered window. To move between windows, use the command:

/win number

For example, if you joined the #linode channel on Window 2, you can get back to it with the command:

/win 2

Managing and Manipulating Windows

Use the Alt key and the window number to change to a different window. Window numbers 1 through 10 are 1 through 0 on the keyboard, and can be accessed by using the keybindings M-1 through M-0. Windows numbered 11 through 19 are accessed by using the key bindings M-q through M-o. Irssi does support more than 19 windows. Windows 20 and up are not accessible by key bindings. Issue the command below to navigate between windows:

/win number
If the Alt + num command does not switch windows, use esc followed by the window number.

Below are more commands for navigating between windows:

  • /win list - generates a list in detail of all the windows. Sample output is below.

    Window list output sample.

  • Alt+A (/window goto active) - changes the focus of the current window to the window with the highest amount of activity and the lowest identifier.

  • Ctrl-n (/window next) - moves the current focus to the next window in sequence.

  • Ctrl-p (/window previous) - moves the current focus to the previous window in sequence.

  • /wc (/window close) - closes the currently selected window.

Adding Default Networks

To automatically join a network when Irssi starts, run:

/server add -auto -network OFTC 6667

There are several options in this command. Let’s go over them briefly:

  • The -auto flag tells Irssi to connect to the server on startup.
  • The -network flag associates the server with a specific network. This is useful if you want to add multiple servers on the same network. Here I’ve associated with the network name OFTC
  • Next we provide the server address we’re connecting to,
  • Finally we specify a port to connect to the server on. You can leave this blank to use the default port, but if there’s an encrypted option we suggest using it.

Note that you may add as many channels as you like.

Irssi Commands and Usage

All Irssi commands are preceded by a slash (/). Each channel you join as well as any private messages you receive will appear in their own window. A prompt down on the left-hand side will display the name of the active window.

If you expect output from a command but don’t see it, you may need to return to your (status) channel.

Irssi commands are provided in the table below:

/banSets or lists bans for a channel
/clearClears a channel buffer
/disconnectDisconnects from the network that has focus
/exitDisconnects your client from all networks and returns to the shell prompt
/joinJoins a channel
/kickKicks a user out
/kickbanKickbans a user
/msgSends a private message to a user
/namesLists the users in the current channel
/queryOpens a query window with a user or closes a current query window
/topicDisplays/edits the current topic
/unbanUnbans everyone
/whoisDisplays user information
/window closeForces closure of a window

Disconnecting and Exiting Irssi

Disconnect from an IRC network by using this command, replacing freenode with your network:

/disconnect freenode

Exit the Irssi program using the command:


Configuring Hilights

The hilight command will highlight certain words used in the channels you have joined. If there are particular words or topics that you want to keep track of, add them with this command :

/hilight word

To remove a hilight, use the command:

/dehilight word

User-friendly Plugins

Enhance your Irssi experience with user-friendly plugins! Add a full list of open windows to the bottom of the screen, colored nicks, and more. Check out the Using Plugins section of the Advanced Irssi Usage guide.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

This page was originally published on

Your Feedback Is Important

Let us know if this guide was helpful to you.

Join the conversation.
Read other comments or post your own below. Comments must be respectful, constructive, and relevant to the topic of the guide. Do not post external links or advertisements. Before posting, consider if your comment would be better addressed by contacting our Support team or asking on our Community Site.
The Disqus commenting system for Linode Docs requires the acceptance of Functional Cookies, which allow us to analyze site usage so we can measure and improve performance. To view and create comments for this article, please update your Cookie Preferences on this website and refresh this web page. Please note: You must have JavaScript enabled in your browser.