Monitor Services with Nagios on Ubuntu 12.04

Select distribution:
Traducciones al Español
Estamos traduciendo nuestros guías y tutoriales al Español. Es posible que usted esté viendo una traducción generada automáticamente. Estamos trabajando con traductores profesionales para verificar las traducciones de nuestro sitio web. Este proyecto es un trabajo en curso.
Deprecated

This guide has been deprecated and is no longer being maintained.

Create a Linode account to try this guide with a $ credit.
This credit will be applied to any valid services used during your first  days.

Nagios is a monitoring tool that allows you to monitor services on a single server or a pool of servers. It can keep an eye on a broad range of network services, including SMTP and POP3 (email), HTTP (web), ICMP (ping), and SSH. In addition to simple uptime monitoring, Nagios also allows administrators to create their own plugins to monitor additional services or devices.

Install Nagios

Before installing Nagios, make sure your hostname is properly set by following the steps outlined in the Setting Up and Securing a Compute Instance. You also need to have a functioning LAMP stack set up on your Linode.

Now you’re ready to install Nagios. Here’s how:

  1. Ensure that your system’s package repository and installed packages are up to date by entering the following commands, one by one:

    sudo apt-get update
    sudo apt-get upgrade
    
  2. Install Nagios from the Ubuntu repository by entering the following command:

    sudo apt-get install -y nagios3
    
  3. Enter an administrator password to complete the installation.

Note
If you do not already have an email server installed on your Linode, Postfix will be installed automatically. The Internet Site configuration will be used by default. You’ll also have to enter a mail name for the system.

Access the Nagios Web Interface

You can now access the Nagios web interface for administration and reporting by visiting http://example.com/nagios3/, where example.com refers to your Linode’s default virtual host. You may also access this interface by visiting http://12.34.56.78/nagios3/, where 12.34.56.78 is the IP address of your Linode. You will need to authenticate with the nagiosadmin user you created earlier.

Note
The above example does not use SSL, and your password will be sent unencrypted. If you want to use encryption, you will need to generate (or purchase) and install an SSL certificate. Steps for generating and using your own certificate can be found in our SSL guide.

Configure Notifications

A great deal of the power of Nagios is its ability to send notifications and alerts regarding the status of services and devices. While most of this fine-grained configuration is beyond the scope of this document, we have outlined some basic notifications below.

Email Alerts

Nagios can send alerts by email, but to receive them you’ll need to add your email address to the Nagios configuration file. Here’s how:

  1. Open the Nagios configuration file for editing by entering the following command:

    sudo nano /etc/nagios3/conf.d/contacts_nagios2.cfg
    
  2. Enter your system username and your email address by replacing your_username with your username, and youremail@example.com with your email address.

    File: /etc/nagios3/conf.d/contacts\\_nagios2.cfg
     1
     2
     3
     4
     5
     6
     7
     8
     9
    10
    
    define contact{
        contact_name your_username
        service_notification_period 24x7
        host_notification_period 24x7
        service_notification_options w,u,c,r,f
        host_notification_options d,u,r,f
        service_notification_commands notify-service-by-email
        host_notification_commands notify-host-by-email
        email <youremail@example.com>
    }
    Note
    To send email alerts to more than one user, duplicate the define contact section for as many users as you want. Or, to configure notifications to a group, edit the define contactgroup section.
  3. Save the changes to the configuration file by pressing Control + x and then pressing y.

  4. Restart Nagios to apply the changes:

    sudo service nagios3 restart
    

IRC Notifications

You can also configure Nagios to send notifications to an IRC channel through a bot. Here’s how:

  1. Enter the following command to install the IRC bot:

    sudo apt-get install nagircbot
    
  2. You’ll need to provide a few parameters to the IRC bot - such as its nickname and server - in order to use it. To see a list of parameters, enter the following command:

    nagircbot -h
    
  3. To start the Nagios IRC bot, enter the following command:

    sudo nagircbot
    
  4. Now you need to set those parameters. Use the following example as a starting point. Replace irc.example.com with the address of your IRC network, and #example with the name of the IRC channel to which the bot should send notifications. Replace nagircbot with the desired nickname for your bot, and ident and realname with the ident and real name strings for the IRC bot.

    nagircbot -f /var/cache/nagios3/status.dat -s irc.example.com:6667 -c \#example -C -n nagircbot -u ident -U realname -I 900
    

    In the above example, -f /usr/local/nagios/var/status.dat tells the bot where to get status updates. The -C flag allows the bot to send colored messages to the channel depending on the status of the service. When services are down, red status messages are displayed. These messages turn green when the service has recovered. Warnings are displayed in yellow, but do not typically represent a critical issue.

    The -I 900 parameter tells the bot to send a status message to the channel every 900 seconds (15 minutes). For example, the bot may send something like Critical: 0, warning: 1, ok: 6, up: 2, down: 0, unreachable: 0, pending: 0, which indicates that there are no critical messages and 1 warning.

Accept External Commands

Nagios can accept external commands so that you can acknowledge problems, add comments, and more. Here’s how to enable external commands:

  1. Open the Nagios configuration file for editing by entering the following command:

    sudo nano /etc/nagios3/nagios.cfg
    
  2. Change the check_external_commands setting to check_external_commands=1.

  3. Save the changes to the configuration file by pressing Control + x and then pressing y.

  4. Restart Apache by entering the following command:

    sudo service apache2 restart
    
  5. Open the system group file for editing by entering the following command:

    sudo nano /etc/group
    
  6. Change the nagios:x:118 setting to nagios:x:118:www-data.

  7. Save the changes to the configuration file by pressing Control + x and then pressing y.

  8. Enter the following command to change the permissions of a Nagios configuration file:

    sudo chmod g+x /var/lib/nagios3/rw
    
  9. Enter the following command the change the permissions of the Nagios directory:

    sudo chmod g+x /var/lib/nagios3
    
  10. Restart Nagios by entering the following command:

    sudo service nagios3 restart
    

Congratulations! External commands are now enabled.

Next Steps

Nagios contains numerous features that are beyond the scope of this document. You are encouraged to explore the resources listed below and the administrative interface for more information regarding the setup and configuration of Nagios.

Congratulations on your new Nagios monitoring and notification system!

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

This page was originally published on


Your Feedback Is Important

Let us know if this guide was helpful to you.


Join the conversation.
Read other comments or post your own below. Comments must be respectful, constructive, and relevant to the topic of the guide. Do not post external links or advertisements. Before posting, consider if your comment would be better addressed by contacting our Support team or asking on our Community Site.
The Disqus commenting system for Linode Docs requires the acceptance of Functional Cookies, which allow us to analyze site usage so we can measure and improve performance. To view and create comments for this article, please update your Cookie Preferences on this website and refresh this web page. Please note: You must have JavaScript enabled in your browser.