Use Cherokee Web Server on Ubuntu 12.04
Updated by Linode Written by Linode
DeprecatedThis guide has been deprecated and is no longer being maintained.
Cherokee is a fast, flexible web server for POSIX-compliant operating systems such as Linux. It’s designed to be easy to administer, and includes support for a wide range of common web server functions.
This tutorial explains how to install and configure the Cherokee web server on Ubuntu 12.04 LTS (Precise Pangolin). We will be performing the installation through a terminal emulator; please make sure you are logged into your Linode as a non-root user via SSH.
This document assumes that you already have a working and up to date Ubuntu 12.04 system. If you have not followed our getting started guide, we recommend that you do so prior to following these instructions.
Set the Hostname
Before you begin installing and configuring the components described in this guide, please make sure you’ve followed our instructions for setting your hostname. Issue the following commands to make sure it is set properly:
hostname hostname -f
The first command will show your short hostname, and the second will show your fully qualified domain name (FQDN).
Check Package Sources
First, make sure you have the
universe repositories enabled on your system. Your
/etc/apt/sources.list should resemble the following (you may have to uncomment or add the
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
## main & restricted repositories deb http://us.archive.ubuntu.com/ubuntu/ lucid main restricted deb-src http://us.archive.ubuntu.com/ubuntu/ lucid main restricted deb http://security.ubuntu.com/ubuntu lucid-security main restricted deb-src http://security.ubuntu.com/ubuntu lucid-security main restricted ## universe repositories deb http://us.archive.ubuntu.com/ubuntu/ lucid universe deb-src http://us.archive.ubuntu.com/ubuntu/ lucid universe deb http://us.archive.ubuntu.com/ubuntu/ lucid-updates universe deb-src http://us.archive.ubuntu.com/ubuntu/ lucid-updates universe deb http://security.ubuntu.com/ubuntu lucid-security universe deb-src http://security.ubuntu.com/ubuntu lucid-security universe
If you had to enable new repositories, update your package lists:
sudo apt-get update && apt-get upgrade
Next, we’ll get Cherokee installed and configured.
Install the Cherokee web server, its documentation and some useful modules (including support for SSL):
sudo apt-get install cherokee cherokee-doc libcherokee-mod-libssl libcherokee-mod-streaming libcherokee-mod-rrd
Several packages will be installed in addition to the main server package. You may visit your Linode’s IP address (or domain name, if you have it pointed to the IP) in a web browser to verify that Cherokee is running. You should see the default Cherokee test page.
The Cherokee web server includes an easy to use, comprehensive administration interface. This interface, known as
cherokee-admin, is the recommended means of administering your web server.
cherokee-admin by issuing the following command:
cherokee-admin -b &
This instructs the administration program to bind to all IP addresses so it may be reached remotely. It will be launched in the background, so you’ll still be able to use your SSH session. You should see output similar to the following:
[email protected]:~# cherokee-admin -b &  2154 [email protected]:~# Login: User: admin One-time Password: eFxccWtngt75ALZg Web Interface: URL: http://localhost:9090/ Cherokee Web Server 0.99.39 (Feb 2 2010): Listening on port ALL:9090, TLS disabled, IPv6 disabled, using epoll, 4096 fds system limit, max. 2041 connections, caching I/O, single thread
Secure Admin Panel Access
Instead of binding to all interfaces on your Linode, you may wish to bind to localhost and use SSH port forwarding to securely reach the administration system from your workstation. To do so, issue the following commands to launch
cherokee-admin and set up an SSH tunnel. The first command is not required if you haven’t already launched
cherokee-admin. You may need to install the
killall command first by running
sudo apt-get install psmisc.
On your Linode:
killall cherokee-admin cherokee-admin &
In a terminal window on your local workstation (MacOS X, Linux, BSD, etc):
ssh -L 9090:localhost:9090 [email protected] -N
Replace “198.51.100.0” with your Linode’s IP address. You may now visit
http://localhost:9090 in your web browser via the SSH tunnel. To stop the tunnel, simply press CTRL+C in your local terminal window.
You’ll be presented with the Cherokee administration panel, which you may use to configure websites and specify configuration options. You’ll still need to log in using the username and one-time password provided when you launched
Secure Admin Panel Access on Windows
You can use PuTTY to set up a secure SSH tunnel for Cherokee administration. Enter your Linode’s public IP address in the session tab:
Expand the “Connection -> SSH” menus to select the “Tunnels” configuration page. Enter the values shown here:
Back on the session tab, enter “Cherokee Admin” in the “Saved Sessions” field and click “Save” to retain your settings for future use.
Click “Open” to connect to your server and start the tunnel. You may receive a warning similar to the one shown here:
Click “Yes” to continue, and log into your Linode as you normally would. As long as the SSH session is open you’ll be able to navigate to
http://localhost:9090 in your web browser to access the Cherokee admin panel via the secure tunnel.
Be sure to stop
cherokee-admin using the
killall command shown above once you’re done configuring your system. Congratulations, you’ve successfully installed the Cherokee web server on your Linode!
You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.
- Cherokee Web Server Documentation
- Host Web Apps with Cherokee and PHP-FastCGI on Ubuntu 10.04 LTS (Lucid)
Join our Community
This guide is published under a CC BY-ND 3.0 license.