Traducciones al Español
Estamos traduciendo nuestros guías y tutoriales al Español. Es posible que usted esté viendo una traducción generada automáticamente. Estamos trabajando con traductores profesionales para verificar las traducciones de nuestro sitio web. Este proyecto es un trabajo en curso.
Create a Linode account to try this guide with a $ credit.
This credit will be applied to any valid services used during your first  days.

The PHP Fast Process Manager is a FastCGI handler for PHP scripts and applications. It’s commonly paired with web servers to serve applications which require a PHP framework, such as web forums or login gateways, while the web server returns HTML, JavaScript, and other non-PHP content.

Before You Begin

  • You need a working NGINX setup. If you do not already have that, complete Part 1 of our Getting Started with NGINX series: Basic Installation and Setup.

  • You will need root access to the system, or a user account with sudo privileges.

  • Update your system’s packages.

Install and Configure PHP-FPM

  1. Install the PHP process manager. On CentOS, Debian, and Ubuntu, the package name to install is php-fpm.

    You can verify the PHP-FPM service is running with:

    systemctl status php7.0-fpm.service
    
  2. Depending on your distribution and PHP version, the PHP configuration files will be stored in different locations. This guide is using PHP 7.0 from Ubuntu’s repositories on Ubuntu 16.04 as an example, and the /etc/php/7.0/fpm/pool.d/www.conf and /etc/php/7.0/fpm/php.ini files are what we’ll be modifying.

    Find those full file paths using a find command:

    find / \( -iname "php.ini" -o -name "www.conf" \)
    

    The output should look similar to:

    root@localhost:~# find / \( -iname "php.ini" -o -name "www.conf" \)
    /etc/php/7.0/fpm/php.ini
    /etc/php/7.0/fpm/pool.d/www.conf
    /etc/php/7.0/cli/php.ini
    
  3. The listen.owner and listen.group directives determines owner for PHP-FPM socket. Those are set to www-data by default, but they need to match the user and group NGINX is running as. If you installed NGINX using our Getting Started with NGINX series, then your setup will be using the nginx user and group. You can verify with:

    ps -aux | grep nginx
    

    The output should be similar to:

    root@localhost:~# ps -aux | grep nginx
    root      3448  0.0  0.0  32500  3516 ?        Ss   18:21   0:00 nginx: master process /        usr/sbin/nginx -c /etc/nginx/nginx.conf
    nginx     3603  0.0  0.0  32912  2560 ?        S    18:24   0:00 nginx: worker process
    nginx     3604  0.0  0.0  32912  3212 ?        S    18:24   0:00 nginx: worker process
    

    This shows the NGINX master process is running as root, and the worker processes are running as the nginx user and group. Change the listen directives to that:

    sed -i 's/listen.owner = www-data/listen.owner = nginx/g' /etc/php/7.0/fpm/pool.d/www.conf
    sed -i 's/listen.group = www-data/listen.group = nginx/g' /etc/php/7.0/fpm/pool.d/www.conf
    
  4. By default, PHP-FPM process is run as the www-data user and group. Again, those need to be edited so that those match user and group of running NGINX instance, otherwise permission errors may occur when NGINX passed PHP requests to PHP-FPM.

    Change user and group directives to NGINX user and group:

    sed -i 's/user = www-data/user = nginx/g' /etc/php/7.0/fpm/pool.d/www.conf
    sed -i 's/group = www-data/group = nginx/g' /etc/php/7.0/fpm/pool.d/www.conf
    
  5. When pairing NGINX with PHP-FPM, it’s possible to return to NGINX a .php URI that does not actually exist within the site’s directory structure. The PHP processor will process the URI, and execute the .php file, because its job is to process anything handed to it by NGINX. This presents a security problem.

    It’s important to limit what NGINX passes to PHP-FPM so malicious scripts can’t be injected into return streams to the server. Instead, the request is stopped, possibly then resulting in a 404. There are multiple ways to do this (see the NGINX wiki) but here we chose to specify the setting in PHP-FPM rather than in NGINX’s configuration.

    sed -i 's/;cgi.fix_pathinfo=1/cgi.fix_pathinfo=0/g' /etc/php/7.0/fpm/php.ini
    

    You’ll notice that ;cgi.fix_pathinfo=1 is commented out by default. Setting it to 0 and uncommenting it will enforce the configuration should there be any upstream changes in the default value in the future.

  6. Restart PHP-FPM to apply the changes:

    systemctl restart php7.0-fpm.service
    

Configure the NGINX Server Block

  1. Again pulling from Part 1 of our NGINX series, we’ll start with a basic Server Block for a static HTTP page being served from /var/www/example.com. Replace example.com with your site’s domain or IP address, and the root directive with your site’s root directory.

    File: /etc/nginx/conf.d/example.com.conf
    1
    2
    3
    4
    5
    6
    7
    
    server {
        listen         80 default_server;
        listen         [::]:80 default_server;
        server_name    example.com www.example.com;
        root           /var/www/example.com;
        index          index.html;
    }
  2. To the Server Block above, add a location block containing the PHP directives. You should then have:

    File: /etc/nginx/conf.d/example.com.conf
     1
     2
     3
     4
     5
     6
     7
     8
     9
    10
    11
    12
    13
    14
    
    server {
        listen         80 default_server;
        listen         [::]:80 default_server;
        server_name    example.com www.example.com;
        root           /var/www/example.com;
        index          index.html;
    
      location ~* \.php$ {
        fastcgi_pass unix:/run/php/php7.0-fpm.sock;
        include         fastcgi_params;
        fastcgi_param   SCRIPT_FILENAME    $document_root$fastcgi_script_name;
        fastcgi_param   SCRIPT_NAME        $fastcgi_script_name;
      }
    }

    This is just a bare minimum to get PHP-FPM working and you will want to configure it further for your specific needs. Some further points about the configuration above:

    • The location ~* \.php$ means that NGINX will apply this configuration to all .php files (file names are not case sensitive) in your site’s root directory, including any subdirectories containing PHP files.
    • The * in the ~* \.php$ location directive indicates that PHP file names are not case sensitive. This can be removed if you prefer to enforce letter case.
    • The fastcgi_pass location must match the listen = value in /etc/php/7.0/fpm/pool.d/www.conf. It is preferable for performance reasons for PHP-FPM to listen on a UNIX socket instead of a TCP address. Only change this if you require PHP-FPM use network connections.
    • Using $document_root in the SCRIPT_FILENAME parameter instead of an absolute path is preferred by NGINX’s documentation.

    Here’s a variation of the location block above. This includes an if statement which disallows the FPM to process files in the /uploads/ directory. This is a security measure which prevents people from being able to upload .php files to your server or application which the FastCGI process manager would then execute.

    This only applicable if you allow users to upload or submit files to your site. Change the name of the directory from uploads to whatever suits your need.

    File: /etc/nginx/conf.d/example.com.conf
    1
    2
    3
    4
    5
    6
    7
    8
    9
    
      location ~ ^ /uploads/  {
        try_files $uri =404;
        }
        location ~* \.php$ {
        fastcgi_pass unix:/run/php/php7.0-fpm.sock;
        include fastcgi_params;
        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
        fastcgi_param SCRIPT_NAME $fastcgi_script_name;
        }
  3. Reload NGINX:

    nginx -s reload
    
  4. Create a test PHP file so you can verify FPM is working. In the Server Block above, our site is being served from /var/www/example.com, so we’ll create a test file there:

    echo "<?php phpinfo(); ?>" >> /var/www/example.com/test.php
    
  5. Access test.php from a web browser, using your site’s domain or Linode’s IP address. You should see the PHP configuration page:

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

This page was originally published on


Your Feedback Is Important

Let us know if this guide was helpful to you.


Join the conversation.
Read other comments or post your own below. Comments must be respectful, constructive, and relevant to the topic of the guide. Do not post external links or advertisements. Before posting, consider if your comment would be better addressed by contacting our Support team or asking on our Community Site.
The Disqus commenting system for Linode Docs requires the acceptance of Functional Cookies, which allow us to analyze site usage so we can measure and improve performance. To view and create comments for this article, please update your Cookie Preferences on this website and refresh this web page. Please note: You must have JavaScript enabled in your browser.