ext3 (또는 기타)로 포맷 된 디스크 이미지를 만듭니다.
구성 프로필로 이동
empty /dev/ubd * 장치를 찾습니다. 루트와 스왑이 이미있는 경우 아마도 / dev / ubdc 일 것입니다. 드롭 다운에서 새 드라이브 레이블을 선택합니다.
구성 저장
리노드 재부팅
이제 Linode 내부에 다음과 같이 마운트 할 수 있습니다.
mount /dev/ubd [여기에 장치 문자 삽입] /path/to/mountpoint
/path/to/mountpoint는 기존 디렉터리 이어야 합니다.
-크리스
댓글 (2)
A few more commands that might be useful –
[code][root@nova fs]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/hdc6 25G 21G 2.5G 89% /
/dev/hdc1 15M 3.6M 11M 25% /boot
/dev/hdd1 19M 3.6M 15M 19% /mnt/hddboot
/dev/hdd6 18G 17G 57M 100% /mnt/hddroot[/code]
Also, the mount command by itself will also display the existing mounted file systems…
[code][root@nova fs]# mount -v
/dev/hdc6 on / type ext2 (rw)
none on /proc type proc (rw)
/dev/hdc1 on /boot type ext2 (rw)
none on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/hdd1 on /mnt/hddboot type ext2 (rw)
/dev/hdd6 on /mnt/hddroot type ext2 (rw)[/code]
If you take a look at the /proc/swaps file, it’ll tell you what swaps you have:
[code][root@nova fs]# cat /proc/swaps
Filename Type Size Used Priority
/dev/hdc5 partition 136512 0 1
/dev/hdd5 partition 130500 84100 100[/code]
-Chris
Also handy for listing available partitions:
cat /proc/partitions