Ir al contenido principal
BlogLinodeLassie, el perro guardián del cierre

Lassie, el perro guardián del cierre

[b]Lassie - Linode Sistema Autónomo de Apagado Inteligente rEbooter[/b]

Lassie es un perro guardián del apagado. Reiniciará automáticamente su Linode si se apaga inesperadamente. Funciona detectando que tu Linode se ha apagado sin que una tarea de apagado sea responsable de la condición de apagado. Para evitar un bucle, se rendirá después de que se hayan producido 5 arranques en un periodo de 15 minutos.

Está activado por defecto, pero la configuración puede cambiarse en la página [url=https://www.linode.com/members/utilities/watchdog.cfm]Lassie[/url], situada fuera de la nueva [url=https://www.linode.com/members/utilities/]subpestaña Utilidades[/url].

Un efecto secundario de esto es que ahora "reiniciar" desde dentro de su Linode funcionará como se espera, pero un "apagado" desde dentro de su Linode resultará en que Lassie se ponga en marcha y emita un arranque. Anteriormente, ambos comandos resultaban en un apagado. No puedo ganar :). Una solución para esto es emitir un trabajo de apagado a través de Lish, creando un alias para "shutdown": "ssh LinodeUsername@hostXX.linode.com shutdown".

Están previstas notificaciones por correo electrónico.

Que lo disfrutes.
-Chris

Comentarios (10)

  1. Author Photo

    [quote:f17891f4fb=”caker”]
    A side effect of this is that now "reboot" from inside your Linode will function as expected, but a "shutdown" from inside your Linode will result in Lassie kicking in and issuing a boot. Previously both of those commands resulted in a shutdown. I can’t win :). [/quote]

    For what it’s worth, I think this a better default. I might reboot from inside the linode to make sure new libraries are in use, or just invoke the nostalgia of my WIndows day, but the only reason I shutdown is to re-arrange disks or somesuch, which I’m going to be doing from the Web UI anyway.

  2. Author Photo

    [quote:df0090ef37=”caker”][b]Lassie – Linode Autonomous System Shutdown Intelligent rEbooter[/b]

    Lassie is a shutdown watchdog.
    [/quote]

    Since it’s [i]almost[/i] Halloween, please rename it to:

    [b]L[/b]inode [b]A[/b]utonomous [b]S[/b]ystem [b]S[/b]hutdown [b]I[/b]ntelligent r[b]E[/b]booter ag[b]E[/b]nt [b]A[/b]nd [b]T[/b]im[b]ER[/b] (LASSIE EATER)

    James

  3. Author Photo

    I’m a little curious — have shutdowns been a problem?

    I’ve been on Linode since ’04, and mine has never gone down on its own.

    I’m not trying to diss a new and valuable feature — but is it solving a problem that people actually have?

  4. Author Photo

    [quote:c80aeb5696=”astrashe3″]I’m a little curious — have shutdowns been a problem?[/quote]
    Definitely not widespread. But, Linux has bugs from time to time, and so does UML. It’s just a nice thing to have, rather than having your Linode go down 5 minutes after you go to bed, and not knowing about it until you get up the next morning. This also solves the "It’s been 2 years since I’ve logged into linode.com, lost my password, the email address you have for me no longer works, and I typed reboot in my Linode and it didn’t come back up" issues (because I hack UML to shutdown on "reboot" so it’ll pick up any config changes between boots).

    -Chris

  5. Author Photo

    I got a pretty major problem when I went to resize my main drive with the new disk space we’ve just been given. Lassie started booting before it finished and pretty nastily barfed the drive.

    Lassie should check that another job isn’t already running before forcing a boot!

  6. Author Photo

    Lassie doesn’t boot your Linode — it just queues up a boot job. Jobs run one after another. And, the resize jobs *should* still be checking that your volume isn’t in use before doing anything… I’ll have a look at the logs.

    -Chris

  7. Author Photo

    OK, I found, and squashed a bug. It was a race. We use the pid file that UML writes out in determining if a Linode is running or not. It turns out that UML doesn’t immediately write this file. If another job ran just after the Linode booted and then checked to see if the Linode was active, it would not find the pid file and assume it was ok to do its thing.

    Now boot jobs wait a few seconds, while checking to see if UML wrote out its pid file, before completing.

    This bug has been in here for a LONG time (way before Lassie), so I’m grateful to you for reporting this, but sorry it ended up in your filesystem being munched on a bit.

    Regards,
    -Chris

  8. Author Photo

    [quote:2a883d7a6d=”caker”]
    This bug has been in here for a LONG time (way before Lassie), so I’m grateful to you for reporting this, but sorry it ended up in your filesystem being munched on a bit.
    [/quote]

    That’s cool. It seems to have e2fscked without any real problems. My only issue now is that the Linode dashboard reports the fs as 20 gigs but inside the linode it’s still 16 gigs. I suspect it might need some manual command-line hackery to get it back in shape, but not sure where to start.

    Feel free to bring my linode down if you think you can resize it to its proper size. Otherwise, any ideas on how to do it?

  9. Author Photo

    Try shrinking it to 16G (or 15G) and then re-enlarging? Also, what does fdisk show for the partition size? It’s possible that the partition got enlarged, but not the file
    system. If that’s the case, then you should be able to enlarge the file system from within the linode.

  10. Author Photo

    [quote:2a7ae073e2=”SteveG”]Try shrinking it to 16G (or 15G) and then re-enlarging?[/quote]

    That did the trick. Thanks!

Dejar una respuesta

Su dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *.